Dyna-mo Instruments is partnered with some of the worlds best monitoring system providers in addition to our in-house developed solutions.
StabiAlert - Dynamic Tilt Monitoring
If every second counts for the safety of people and objects, StabiAlert developed high-frequency tilt sensors.
CrackR - The first 3D IoT Crack sensor
The CrackR monitors the movement of a crack autonomously in 3D for many years on end. Easy to install and set to work. You can monitor the sensor data online or using our App and set alarm triggers to receive alerts.
Corrodec 2G - Concrete Corrosion
The CorroDec®2G corrosion sensor is placed over the reinforcing steel before (using Rödel wire) or after concreting. A special sensor wire is routed around the sensor body, which is destroyed by corrosive influences.
Picton BIS - Void Section Sensors
Fail-safe void detection system, providing real time notification to the loss of integrity for embankments, road, rail, bridge scours or landslides.
Dyna-mo Power Systems
Power systems to provide both mains and off-grid power for various applications.
From small power systems for remote devices to large 110-240v power supply for more power hungry installations.
Quick and easy installation with multiple power output connections.
Dyna-mo N-Viro - Environmental Monitoring
N-Viro systems provide remote wireless monitoring of multiple environmental parameters including noise, air quality, wind, rainfall, gas detection, temperature, humidity and air pressure.
The CMM range provides the perfect monitoring system for construction and demolition sites ensuring noise and dust levels do not create an environmental hazard for local residents and workers onsite.
The WS range provides remote weather monitoring for a variety of applications.
Dyna-mo Vision - Intelligent Remote Video Monitoring
Dyna-mo Vision provides remote video monitoring, security and time-lapse recording in any location with a mobile (LTE) signal. The system incorporates high performance Dahua cameras, high speed LTE gateway and cloud adapter. It can be configured to record 24/7 or be triggered by motion, supported by desktop and mobile apps to review recordings, apply filters based on intelligent analytics and download MP4 video files including time-lapse recordings.
Wireless Remote Monitoring
The wide range of wireless structural and geotechnical monitoring systems means choosing the right system for your monitoring project can be complicated.
At Dyna-mo Instruments we are partnered with many of the system providers and can support the decision making process including developing full installation proposals to integrate geotechnical, structural and environmental sensors.
Woodsense - Timber Moister Sensors
Monitor moisture conditions with a wireless sensor
Intelligent moisture solution measures the wood moisture content inside the timber aswell as the surrounding temperature and air humidity to detect critical moisture conditions.
The sensor can easily be installed by anyone with two screws and a three step registration process accessible through the QR code on the sensor.
It has a battery lifetime of 10 years and operates on the LoRaWAN network.
Hypoint - LiDAR Vehicle Dimension Scanning
The HawkScan solution measures and classifies vehicles during normal traffic flow. Eye-safe LiDAR sensors scan objects 75 times a second, enabling fully-automated length, width, and height measurement with the vehicle speed and movement direction.
The measurement data recorded to generate a 3D model for each vehicle, visualizing excessive heights, widths, and lengths. Also, the solution enables the counting of axles, axle spacing, and vehicle type.
Giatec - SmartRock Concrete Sensors
Install this concrete sensor directly onto the rebar. Temperature and strength readings are immediately sent to your smartphone.
liminate reliance on error-prone field-cured cylinder break tests. SmartRock tests strength based on ASTM C1074 and is approved by DOTs.
Make critical, real-time decisions during concrete curing. Help crews hit project milestones faster, saving weeks off construction schedules.
Kistler - Weigh-In-Motion
Weigh In Motion provides reliable traffic data, detecting overloaded vehicles in particular. WIM helps improve road safety and reduce road damage, it also prevents unfair competition among freight forwarders. Weigh In Motion systems can also be used to restrict roadways, such as bridges, based on weight. WIM solutions are also used in ports at harbors for automatic measurement of load quantities.